Product ID:HIDE ALL INTERIOR VINYL FLAT, 6/SERIES
MSDS Date:07/25/1986
FSC:8010
NIIN:00N034767
MSDS Number: BQFPK

BENNETTE PAINT MFG CO INC

401 INDUSTRY DR
HAMPTON, VA 23661
US

Emergency Phone: 804-838-7777

Info Phone: 804-838-7777

Cage: 3Y107

BENNETTE PAINT MANUFACTURING CO INC

HAMPTON, VA 23661 US

Telephone: 804-838-7777

Cage: 3Y107

FLUX CALCINED DIATOMACEOUS EARTH

POLYVINYL ACETATE EMULSION

METHANOL;(METHYL ALCOHOL)

CAS: 67-56-1

RTECS: PC1400000

OSHA PEL S,200PPM/250STEL

ACGIH TLV: S,200PPM/250STEL; 93

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

PETROLEUM HYDROCARBON AND COMPLEX LITHIUM SOAP

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

OSHA PEL 50 PPM,C

ACGIH TLV: 50 PPM,C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:AMMONIA, FORMALDEHYDE, AND
RESIDUAL MONOMER VAPORS MAY BE IRRITATING TO EYES, SKIN, MUCOUS
MEMBRANES, RESPIRATORY TRACT AND MAY PRODUCE SYMPTOMS OF HEADACHE,
NAUSEA IN POORLY VENTILATED AREAS. S KIN:PROLONGED OR REPEATED
CONTACT W/PAINT MAY CAUSE IRRITATION. EYE:DIRECT CONTACT WITH PAINT
MAY RESULT IN IRRITAITON.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ALLERGY OR SKIN SENSITIZATION.

First Aid:INHAL:MOVE TO FRESH AIR. EYE:IMMEDIATELY FLUSH WITH PLENTY OF
WATER FOR AT LEAST 15 MINUTES AND CALL MD. SKIN:WASH THOROUGHLY
WITH SOAP. INGEST:GIVE TWO GLASSES OF WATER TO DRINK & CALL MD.

Flash Point:>200F,>93C
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL PROT
EQUIP . WATER MAY BE USED TO COOL CLSD CNTNRS TO PVNT PRESS BUILDUP
& POSS EXPLO WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.

Spill Release Procedures:RECOVER LIQUID WITH ABSORBENT MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID PROLONGED CONTACT WITH SKIN.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

Respiratory Protection:IN CONFINED AREAS & WHEN SPRAYING, USE
NIOSH/MSHA APPROVED RESPIRATORY DEVICE.
Ventilation:PROPER VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE NEEDED UNLESS SPECIAL EQUIPMENT
DESIRED.
Work Hygienic Practices:WASH HANDS AFTER USE, BEFORE EATING OR USING
WASHROOM.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:T6
Boiling Pt:B.P. Text:>212F,>100C
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:83

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXTREME TEMPERATURES IN CLOSED CONTAINERS.
Hazardous Decomposition Products:NONE.

Waste Disposal Methods:IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.